LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rio Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (1 Of 2) >> DTC P0343 Camshaft Position Sensor A Circuit High Input >> Ground Circuit Inspection

Ground Circuit Inspection

  1. Key "OFF".
  2. Disconnect CMPS connector.
  3. Key "ON".
  4. Measure the voltage between terminal 2 of CMPS harness connector and chassis ground. (A)
  5. Measure the voltage between terminal 2 and 3 of CMPS harness connector. (B)

    Specification: "A" - "B" = Below 200mV

  6. Is the measured voltage within specification?

    YES 

    NO