System Inspection
- Air clog check
- Check "Air intake system"
- Check clog of air-cleaner.
- Check deterioration or contamination on throttle body and gasket.
- Check contamination, damage, stuck or clog on intake manifold, PCSV, ISCA and injectors.
- Is there any problem?
YES
- Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure
NO
- Go to 2 "Fuel pressure check" procedure
- Check "Air intake system"
- Fuel pressure check.
- Key "OFF".
- Remove fuel pump relay.
- Engine start and wait until engine stop. and then key "OFF".
- Install fuel pump relay.
- Connect fuel pressure gauge using the correct adapter.
- Start the engine, and record fuel pressure.
Specification: Approx. 3.5kg/cm2 (343.2kPa, 50psi)
- Is the fuel pressure normal?
YES
- Go to "COMPONENT INSPECTION " procedure.
NO
- Check the supply pressure of fuel pump.
- Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.