LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rio Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Overhaul >> Cooling System >> Removal >> Water Pump

Water Pump

  1. Drain the engine coolant.
    WARNING: System is under high pressure when the engine is hot.
    To avoid danger of releasing scalding engine coolant, remove the cap only when the engine is cool.
  2. Loosen the water pump pulley bolts.
  3. Remove the drive belts.
    Fig 1: Identifying Drive Belts
    G04861608Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the water pump pulley.
  5. Remove the timing belt. (Refer to REMOVAL  )
  6. Remove the timing belt idler.
  7. Remove the water pump.
    1. Remove the 2 bolts and alternator brace (A).
    2. Remove the 3 bolts and remove the water pump (B) and gasket.
      Fig 2: Identifying Water Pump And Bolts
      G04861837Courtesy of KIA MOTORS AMERICA, INC.