LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Wagoneer L Base, RWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Buckle, Seat Belt >> Removal And Installation >> Third Row Center Seat >> Notes

Third Row Center Seat: Notes

REMOVAL 

WARNING:

To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts, buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the Mopar® Parts Catalog. Failure to follow these instructions may result in possible serious or fatal injury.

  1. Remove the third row 40% seat from the vehicle. Refer to SEAT, THIRD ROW, REMOVAL AND INSTALLATION .
    GC0205211Courtesy of CHRYSLER GROUP, LLC
    1 - Third Row Center Seat Belt Buckle Bolt
    2 - Buckle
  2. Remove the third row center seat belt buckle bolt from the buckle anchor.
  3. Remove the third row center buckle from the vehicle.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.