LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Compass Limited >> Repair and Diagnosis >> Steering >> Steering Gear >> Steering System >> Column >> Wheel, Steering >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. If removed, install the steering wheel switches.
  2. Position the steering wheel (3) on the shaft, aligning the references on the steering wheel and on the steering column.
    GC0179316Courtesy of CHRYSLER GROUP, LLC
  3. If equipped, install the steering wheel damper.
  4. Connect the steering wheel wire harness connector (1).
  5. Install a NEW  steering wheel nut (2) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  6. Install the driver airbag. Refer to DRIVER AIR BAG .
  7. Connect the negative battery cable.