Instrument Panel
REMOVAL
- Disconnect and isolate the negative battery cable(s). Refer to BATTERY DISCONNECT AND CONNECT - 3.6L or BATTERY DISCONNECT AND CONNECT - 5.7L .
- Remove the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION
.
1 - Fasteners 2 - Power Distribution Center (PDC) - Remove the fasteners for the PDC.
1 - Wire Harness Connectors 2 - Power Distribution Center (PDC) - Pull the PDC away from the studs allowing access to wire harness connectors.
- Release the wire harness retainer(s) and disconnect the wire harness connectors from the PDC.
- Remove the PDC from the vehicle.
INSTALLATION
- Position the PDC in the vehicle and connect the wire harness connectors and engage the wire harness retainer(s).
- Install the fasteners and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
- Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
- Connect the negative battery cable(s). Refer to BATTERY DISCONNECT AND CONNECT - 3.6L or BATTERY DISCONNECT AND CONNECT - 5.7L .