LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee Trailhawk >> Repair and Diagnosis >> Transmission >> Transfer Case >> Power Transfer Unit (Service Information) >> Plug, Ring Gear Shaft >> Removal

Plug, Ring Gear Shaft: Removal

  1. Remove the Power Transfer Unit (PTU) from the vehicle. Refer to REMOVAL .
  2. Place the PTU on a suitable work surface.
    GC0159515Courtesy of CHRYSLER GROUP, LLC
  3. Using a suitable sharp chisel (1), pierce a hole in the center of the plug (2).
    GC0159200Courtesy of CHRYSLER GROUP, LLC
  4. Drive the chisel (1) sideways to lever the plug (2) out of the PTU.
    GC0159318Courtesy of CHRYSLER GROUP, LLC
  5. Separate the plug (1) from the PTU.