LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Altitude, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Shield, Heat >> Removal And Installation >> Tailpipe Heat Shield

Tailpipe Heat Shield

REMOVAL 

  1. Remove the spare tire and wheel.
    GC0192594Courtesy of CHRYSLER GROUP, LLC
  2. Remove the three outer nuts (1) securing the exhaust tailpipe heat shield.
    GC0192748Courtesy of CHRYSLER GROUP, LLC
  3. Remove the bolts (1) and the exhaust tailpipe heat shield (2).

INSTALLATION 

  1. Check that the heat shield is not damaged.
    GC0192748Courtesy of CHRYSLER GROUP, LLC
  2. Install the exhaust muffler heat shield (2) and tighten the bolts (1) to the proper specifications. Refer to TORQUE SPECIFICATIONS - 3.6L .
    GC0192594Courtesy of CHRYSLER GROUP, LLC
  3. Install the three outer nuts (1) securing the exhaust tailpipe heat shield and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS - 3.6L .
  4. Install the spare tire and wheel.