LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) >> Cover, Engine >> Installation

Cover, Engine: Installation

  1. Locate the engine cover.
    GC0169900Courtesy of CHRYSLER GROUP, LLC
  2. Carefully locate the rear attachment points on the engine cover and gently push them into the C-grommets at the rear of the engine bay.
    NOTE:

    Excessive force (more than 15 pounds) will damage the engine cover and grommet brackets.

    GC0169830Courtesy of CHRYSLER GROUP, LLC
  3. Using your hands, gently push down until you feel the grommet and ball stud engage, ensuring grommet and ball stud retention.
    NOTE:

    Excessive force (more than 15 pounds) will damage the engine cover.

  4. Using your hands, lightly lift up around the edges of the engine cover to ensure that the cover is not loose and that all of the grommets are engaged.