LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Grand Cherokee SRT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Thermostat >> Installation >> 3.6L Coolant Crossover

3.6L Coolant Crossover

Fig 1: Coolant Outlet Housing, Water Pump & Bolts
GC0144267Courtesy of CHRYSLER GROUP, LLC
  1. Clean gasket sealing surfaces.
  2. Install new gasket onto the coolant crossover.
    NOTE:

    The shorter M6 mounting bolts (2), bolt directly to the engine timing cover.

  3. Install the coolant crossover. Tighten bolts in a crisscross pattern to the proper specification. Refer to SPECIFICATIONS .
  4. Install the heater supply hose to the coolant crossover (1).
  5. Install the thermostat housing. Refer to THERMOSTAT, INSTALLATION .