LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Patriot Limited, AWD, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Sensor, Exhaust Temperature >> Removal >> Removal

Sensor, Exhaust Temperature: Removal: Removal

Fig 1: Identifying Downstream Temperature Sensor
GC0138491Courtesy of CHRYSLER GROUP, LLC
  1. Remove the engine cover.
  2. Disconnect and isolate negative batter cable.
  3. Disconnect the Exhaust Gas Temperature (EGT) sensor wire harness connector.
  4. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  5. Remove the EGT sensor (2).