LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Wrangler Sport S, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System - Service Information >> Sensor, Intelligent Battery (IBS) >> Operation >> Operation

Sensor, Intelligent Battery (IBS): Operation: Operation

The battery sensor measures, calculates and reports battery: voltage, current, temperature, state of charge and other parameters via a LIN (Local Interconnect Network) bus to a master control module (engine controller, body controller etc.). The battery sensor is used to optimize vehicle performance (maintain battery charge, fuel economy etc.) via the vehicles electrical system

The battery sensor is readable/diagnosable via a "scan tool" that can display all of the available parameters needed for vehicle servicing or trouble shooting.

Information the Intelligent Battery Sensor (IBS) send out on the CAN Bus is

When the IBS is powered up for the first time or is powered after a power disconnection, it goes into a so called "recalibration" phase, where the IBS must recognize the type of battery and its characteristics and state. So in this phase the tolerances on the state functions (SOC, SOF, SOH) are greater than in normal working condition.