LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2013 >> Patriot Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Power Distribution) >> Module, Totally Integrated Power (TIPM) >> Removal >> Removal

Module, Totally Integrated Power (TIPM): Removal: Removal

WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: TIPM Positive Cable, Retaining Nut, & Mounting Stud
GC0085937Courtesy of CHRYSLER GROUP, LLC
  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
  3. Open the Totally Integrated Power Module (TIPM) cover (4).
  4. Remove the TIPM positive cable retaining nut (1) and remove the cable (2) from the mounting stud (3).
    Fig 2: Totally Integrated Power Module, Mounting Bracket & Mounting Tabs
    GC0085942Courtesy of CHRYSLER GROUP, LLC
  5. Using an appropriate flat bladed tool, depress the four mounting clips to disengage and remove the TIPM housing (1) from the TIPM bracket mounting tabs (3).
    Fig 3: TIPM Housing & Wire Harness Connectors
    GC0100789Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect each of the seven TIPM wire harness connectors from the TIPM housing (2).
  7. Remove the TIPM from the vehicle.