LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Grand Cherokee SRT-8 >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Gas >> Injector(S), Fuel >> Installation >> 3.6L

Injector(S), Fuel: Installation: 3.6L

Fig 1: O-ring Seals
GC0144263Courtesy of CHRYSLER GROUP, LLC
  1. Lightly lubricate new O-ring seals (1) with engine oil and install on the fuel injector (2).
    Fig 2: O-ring Seals & Fuel Injector
    GC0144264Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Number 2 fuel injector installation shown in illustration, all other fuel injectors similar.

  2. Install the fuel injectors (1) to the fuel rail (2).
    Fig 3: Fuel Rail Bolt Tightening Sequence
    GC0144261Courtesy of CHRYSLER GROUP, LLC
  3. Install the fuel rail, upper inlet manifold and air inlet hose. Refer to RAIL, FUEL, INSTALLATION  or RAIL, FUEL, INSTALLATION .
  4. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
  5. Start the engine and check for leaks.