LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Grand Cherokee 2WD V8-5.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Brake Fluid Level Sensor/Switch >> Service and Repair >> Brake Fluid Level Switch - Removal

Brake Fluid Level Switch - Removal






REMOVAL





1. Disconnect the wire connector (2) from the brake fluid level sensor (3).





2. From the opposite side of the master cylinder reservoir (1) release the sensor locking tabs (2) with a small screw driver.
3. Pull the sensor out of the reservoir (1) from the connector side of the sensor.