LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Grand Cherokee SRT-8 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System & Automatic Transmission Cooling System >> Engine >> HEATER, Engine Block >> Installation >> 3.0L Diesel

3.0L Diesel

WARNING: Risk of injury to skin and eyes due to scalding from hot coolant. Do not open the cooling system unless the temperature is below 90°C (194°F). Wear protective clothing and eye wear. Risk of poisoning if coolant is swallowed. Store coolant in proper and appropriately marked containers.
  1. Disconnect the negative battery cable.
    Fig 1: ENGINE BLOCK HEATER
    GC0118273Courtesy of CHRYSLER LLC
    1 - ENGINE BLOCK HEATER
    2 - CORE PLUG
    3 - ENGINE MOUNT
    4 - WIRING TIE STRAPS
  2. Drain the cooling system. See Cooling - Standard Procedure 
  3. Record the location and snip the wire ties (4).
  4. Unscrew the engine block heater (1) from the core plug hole and remove .