LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Grand Cherokee SRT-8 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System (Service Information) >> Generator >> Removal >> 6.1L

Charging System (Service Information): Generator: Removal: 6.1L

Fig 1: Accessory Drive Belt - 5.7L/6.1L
GC0118256Courtesy of CHRYSLER LLC
WARNING: Disconnect the negative cable from the battery before removing the battery output wire (B+ wire) from the generator. Failure to do so can result in injury or damage to the electrical system.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the air cleaner. Refer to Engine/Air Intake System - Removal .
  3. Remove the serpentine belt. Refer to Cooling/Accessory Drive/BELT, Serpentine - Removal .
    Fig 2: Remove/Install Generator - 5.7L
    GC0118401Courtesy of CHRYSLER LLC
  4. Unsnap the plastic insulator cap from the B+ output terminal.
  5. Remove the B+ terminal mounting nut at the rear of the generator. Disconnect the terminal from the generator.
  6. Disconnect the field wire connector (3) at the rear of the generator by pushing on the connector tab.
  7. Remove two generator mounting bolts (1).
  8. Remove the generator (2) from vehicle.