LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Liberty Sport, 4WD, Part Time >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 42RLE Automatic Transmission (Service Information) >> SENSOR, Variable Line Pressure >> Installation >> Installation

SENSOR, Variable Line Pressure: Installation: Installation

Fig 1: Variable Line Pressure Components
GC0082079Courtesy of CHRYSLER LLC
1 - PRESSURE CONTROL SOLENOID
2 - LINE PRESSURE SENSOR
3 - SHOULDER SCREW
4 - VARIABLE LINE PRESSURE HEADER
5 - MANUAL SHAFT
6 - SCREWS
  1. Install the pressure control solenoid (1) and line pressure sensor (2) into the valve body.
  2. Install the screws (6) to hold the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
  3. Install the electrical connectors to the pressure control solenoid (1) and the line pressure sensor (2).
  4. Install the valve body into the transmission. See Transmission and Transfer Case/Automatic - 42RLE/VALVE BODY - Installation .