LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Sport, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Power Distribution) >> MODULE, Power Inverter >> Removal >> Removal

MODULE, Power Inverter: Removal: Removal

WARNING: This page is about a different car, the 2009 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Inverter Module
GC0118628Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the rear seat cushion assembly. Refer to Body/Seats/SEAT BACK - Removal .
  3. Remove the fastener (1) from the inverter module mounting bracket of the (5).
  4. Slide the module rearward to release the mounting tabs (3) from the slots in the seat frame (2).
  5. Remove the inverter module (4).