LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Windows and Glass >> Windows >> Window Glass >> Liftgate Window Glass >> Service and Repair >> Flip-Up Glass Latch - Removal

Flip-Up Glass Latch - Removal






REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the liftgate (1). Liftgate Trim Panel - Removal






NOTE: Grand Cherokee (WK) shown, Commander (XK) similar.

3. Using a grease pencil or equivalent, mark the position of the latch to aid installation.
4. Disconnect the electrical connectors (1) from the liftgate glass latch (3).
5. Remove the two nuts (2) that secure the latch (3) to the inside of the liftgate.
6. Remove the liftgate glass latch (3) from the vehicle.