LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Liberty Limited, 4WD, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Gas >> Sensor-Intake Air Temperature >> Installation >> Installation - 3.7L

Installation - 3.7L

Fig 1: IAT SENSOR - 3.7L
GC0062748Courtesy of CHRYSLER LLC

The intake manifold air temperature (IAT) sensor (1) is installed into the rubber air intake tube near the throttle body.

  1. Clean mounting hole.
  2. Check condition of sensor O-ring.
  3. Push IAT sensor (1) into rubber intake tube while rotating for installation.
  4. Connect electrical connector (2) to IAT sensor.