LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Liberty 4WD V6-3.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Parking Assist Control Module >> Service and Repair >> Installation

Installation







INSTALLATION





1. Position the park assist module (2) to the right quarter inner panel (1) behind and above the right rear wheel house, forward of the D-pillar.
2. Secure the module to the right quarter inner panel using three plastic push-in fasteners (3).
3. Reconnect the two body wire harness connectors (4) to the module connector receptacles.
4. Reinstall the trim onto the right quarter inner panel.Console Shifter Bezel - Installation.
5. Reconnect the battery negative cable.