LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Liberty 4WD V6-3.7L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position Sensor - Removal

Camshaft Position Sensor - Removal







REMOVAL - 3.7L





The Camshaft Position Sensor (CMP) (3) is bolted to the front/top of the right cylinder head (1).

1. Raise and support vehicle.
2. Disconnect electrical connector at CMP sensor.
3. Remove sensor mounting bolt (2).
4. Carefully twist sensor from cylinder head.
5. Check condition of sensor o-ring.