LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Liberty 4WD V6-3.7L >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Temperature Sensor / Switch >> Service and Repair >> Installation

Installation







INSTALLATION

NOTE: Illustration shown with instrument panel removed for clarity.





NOTE: LHD model shown. RHD model similar.

1. Install the evaporator temperature sensor (1) into rear of the HVAC housing (2) and connect the instrument panel wire harness connector.
2. Install the instrument panel Instrument Panel - Installation.
3. Reconnect the negative battery cable.