LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Liberty 4WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Radiator Support >> Service and Repair >> Radiator Crossmember - Installation

Radiator Crossmember - Installation







INSTALLATION





1. Install the crossmember (1) and install the bolts (3).
2. Tighten the bolts to 10 Nm (85 in. lbs.).
3. Install the hood latch support (5) and install the bolts (4).
4. Tighten the bolts to 10 Nm (85 in. lbs.).
5. Install new rivets (2) attaching the hood latch support to the crossmember.
6. Install the hood latch, Hood Latch - Installation.
7. Install the grille, Grille - Installation.
8. Install a new rivet securing the washer bottle to the crossmember.