LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Liberty 4WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Frame >> Trailer Hitch >> Service and Repair >> Installation

Installation







INSTALLATION





1. Support the trailer hitch (2) with a suitable lifting device and install to the rear rail assembly (1).

NOTE: If equipped with rear tow hooks, support the trailer hitch assembly and install two front bolts to the trailer hitch, then install the rear tow hooks and remaining bolts.

2. Install the bolts (3) and tighten to 95 Nm (70 ft. lbs.).
3. If equipped, install the tow hooks, Installation.




4. Install the trailer tow connector (1) and the bolts (2) to the trailer hitch. Tighten the bolts to 4 Nm (35 in. lbs.).
5. Connect trailer tow harness connector (3) to the trailer tow connector (1).