LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Liberty 4WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Frame >> Cross-Member >> Service and Repair >> Crossmember - Installation

Crossmember - Installation







INSTALLATION





1. Install the crossmember and six bolts and tighten the bolts to 47 Nm (35 ft. lbs.).
2. Install four transmission mount nuts and tighten to 88 Nm (65 ft. lbs.).
3. Remove the transmission lifting device.
4. Install the transfer case skid plate, Transfer Case Skid Plate - Installation.
5. Install the transmission skid plate, Front Skid Plate - Installation.