LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Liberty 4WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Frame >> Cross-Member >> Front Cross-Member >> Service and Repair >> Removal

Removal







REMOVAL





1. Install engine support tool 8534 or equivalent.




2. Raise and support the vehicle.

NOTE: Use a grease marker to mark the lower control arm cam bolts with reference points to ease with the wheel alignment.

3. Remove the lower control arms, Front Lower Control Arm - Removal.




4. Remove the stabilizer bar, Front Stabilizer Bar - Removal.




5. Remove the front axle, if equipped, Removal.
6. Remove the power steering rack, Steering Gear - Removal.




7. Loosen the engine mount through bolts.




NOTE: Using a grease pencil or equivalent, mark the location of the engine support cradle.

8. Support the engine cradle with a suitable lifting device.
9. Remove the engine cradle support bolts and remove the engine cradle.