LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Grand Cherokee SRT-8 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System (Service Information) >> Sensor-Camshaft Position >> Removal >> Sensor-Camshaft Position-5.7L/6.1L

Sensor-Camshaft Position-5.7L/6.1L

Fig 1: Camshaft Position Sensor - 5.7L
GC0015978Courtesy of CHRYSLER LLC

The Camshaft Position Sensor (CMP) (1) is located on right side of timing gear/chain cover (2) near engine thermostat housing.

  1. Disconnect air resonator clamps at throttle body and also at air filter housing. Remove air resonator.
  2. Disconnect electrical connector (4) at CMP sensor.
    Fig 2: CMP Sensor Removal/Installation - 5.7L V8
    GC0012252Courtesy of CHRYSLER LLC
  3. Remove sensor mounting bolt (3).
  4. Carefully twist sensor (2) from timing gear/chain cover (1).
  5. Check condition of sensor O-ring.