Coil-Ignition - 3.7L
Courtesy of CHRYSLER LLC
- Using compressed air, blow out any dirt or contaminants from around top of spark plug.
- Check condition of coil O-ring (2) and replace as necessary. To aid in coil installation, apply silicone to coil O-ring (2).
Courtesy of CHRYSLER LLC
- Position ignition coil (1) into cylinder head opening and push onto spark plug. Do this while guiding coil base over mounting stud.
- Install coil mounting stud nut (2). Tighten to 8 N.m (70 in.lbs).
- Connect electrical connector to coil by snapping into position.
- If necessary, install throttle body air tube.