LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Wrangler Unlimited, Standard >> Repair and Diagnosis >> Maintenance >> Procedures >> Lubrication & Maintenance >> Hoisting >> Standard Procedure >> Standard Procedure - Hoisting Recommendations >> Notes

Standard Procedure - Hoisting Recommendations: Notes

Refer to the Owner's Manual for emergency vehicle lifting procedures.

When properly positioned, a floor jack can be used to lift a Jeep vehicle. See Fig 1. Support the vehicle in the raised position with jack stands at the front and rear ends of the frame rails.

Fig 1: Vehicle Lifting Locations
GC0029605Courtesy of DAIMLERCHRYSLER CORP.
CAUTION: Do not attempt to lift a Jeep vehicle with a floor jack positioned under:
  1. An axle tube.
  2. A body side sill.
  3. A steering linkage component.
  4. A drive shaft.
  5. The engine or transmission oil pan.
  6. The fuel tank.
  7. A front suspension arm.
  8. Transfer case.
NOTE: Use the correct sub-frame rail or frame rail lifting locations only.