LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1995 >> Wrangler S, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.5L >> CODES/MESSAGES (Note: For DTC table, see TEST TC-1A under "Self-Diagnostic Tests.") >> Code 34

Code 34

Scan tool displays SPEED CONTROL SOLENOID CIRCUITS. Condition is: open or shorted condition detected in speed control vacuum or vent solenoid circuits. MIL may not come on.



Scan tool displays SPEED CONTROL SWITCH ALWAYS LOW. Condition is: speed control switch input less than minimum acceptable voltage. MIL may not come on.



Scan tool displays SPEED CONTROL SWITCH ALWAYS HIGH. Condition is: speed control switch input more than maximum acceptable voltage. MIL may not come on.