LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1994 >> Cherokee Country, 4D Utility, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.5L & 4.0L >> Self-Diagnostic System >> System Diagnostics >> Intermittent Failures

Intermittent Failures

Intermittent failures may cause MIL to flicker or stay on until the intermittent failure goes away. However, the corresponding DTC will be retained in PCM memory. If related failure does not reoccur within a certain time frame, related DTC will be erased from PCM memory. Intermittent failures can be caused by a faulty sensor, bad connector or wiring related problems.