Brakelight Switch
Disconnect brakelight switch 6-pin connector. Using an ohmmeter, check for continuity at switch side of connector terminals. See TESTING BRAKELIGHT SWITCH . If continuity is not as specified, check brakelight switch adjustment. If switch adjustment is okay, replace defective brakelight switch.
TESTING BRAKELIGHT SWITCH
| Pedal Position | Terminal Continuity |
|---|---|
| Released | 2 & 5 |
| Depressed | 1 & 4; 3 & 6 |
NOTE:
For connector terminal identification, refer to the CONNECTOR IDENTIFICATION
. For wiring diagrams, see WIRING DIAGRAM
.