LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1989 >> Grand Wagoneer >> Repair and Diagnosis >> Engine Performance >> Adjustment >> Tune-Up - V8 >> Adjustments >> Ignition System >> Ignition Timing

Ignition Timing

  1. Set parking brake. Shift transmission into Park. Warm engine to normal operating temperature. Ensure A/C is off. With ignition switch in the "OFF" position, connect timing light and tachometer.
  2. Disconnect and plug distributor vacuum advance hose. Start engine. With engine at idle speed, check and adjust timing according to specifications listed on Emission Control Label, located inside engine compartment.
  3. To adjust timing, loosen distributor clamp bolt and turn distributor. Tighten distributor clamp bolt and recheck timing. Unplug and reconnect vacuum advance hose.
NOTE: Timing specification is not available from manufacturer. Refer to Emission Control Label located inside engine compartment.