LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1987 >> Grand Wagoneer AW4 >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Testing >> Wiper/Washer System >> Wiper Switch Test

Wiper Switch Test

  1. Check wiper switch continuity, using a Continuity Light (J 21008) or an ohmmeter. Continuity should exist at switch positions indicated in Figure .
  2. Using an ohmmeter, check variable resistance between terminals No. "4" and "5" of intermittent system. If intermittent wipe cycle is not working, but system operates properly on low and high speeds. Turn switch knob counterclockwise as far as possible. Ohmmeter should indicate 5600 through 8400 ohms.
  3. As knob is turned clockwise, resistance should decrease to a minimum of 100 through 900 ohms. Replace switch if continuity or resistance tests fail. If operation is proper, check wiring.