LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1982 >> Scrambler Base, 4.2L Eng VIN C, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Carter BBD 2-Barrel >> Description

Carter BBD 2-Barrel: Description

The Carter carburetor model BBD is a 2-barrel downdraft type. The carburetor incorporates 4 basic fuel metering systems: float (fuel inlet) system; idle (low speed) system; accelerator pump system; and the main (high speed) system. The float (fuel inlet) system maintains constant level of fuel for all engine operating conditions. The idle (low speed) system provides fuel for idle and initial part-throttle operation. The main (high speed) system provides increased fuel for part-throttle and cruising operation. The accelerator pump system provides additional fuel for acceleration.

In addition to the fuel systems, the carburetor uses an automatic choke and choke diaphragm. The choke system temporarily richness the mixture while starting, but also prevents overchoking. On all models, choke is assisted by an electric heating element. This provides for shorter choke duration during warm weather. The choke diaphragm prevents overchoking by opening choke valve when engine is being cranked.

All vehicles are equipped with an electronically controlled stepper motor which controls air flow through metered air bleeds located in each main fuel metering circuit. Stepper motor is activated through an on-board computer. Computer receives information from various sensors located on engine and in exhaust system. Computer then signals stepper motor to retract metering rods from air bleeds (lean) or extend metering rods further into air bleeds (rich).

All Jeep vehicles use a vacuum and electrically operated solenoid called a solevac. It is used to keep engine idle constant when load is placed on engine, such as air conditioning or rear window defroster.