LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 1987 >> XJ6 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis >> Diagnostic Procedure >> Initial Tests

Initial Tests

  1. When the ECU senses the ignition switch has been turned to the "ON" position, it sends a simulated reference signal to the wheel speed sensors as well as illuminating an ABS instrument panel light. As these signals are generated, associated sensor signals and wheel speed sensor output signals are received by the ECU.
  2. Sensor output signals are checked within the ECU for correct reference voltage and response. the ECU checks battery voltage to ensure system voltage is adequate, minimum 10 volts. Wheel acceleration and deceleration levels are checked for proper operation to ensure they are set correctly. If all initial tests are passed satisfactorily, the warning light on insturment panel is turned off.