LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> i-280 S, Standard >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Ignition Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Ignition Switch & Lock Housing Assembly
    GM1492304Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition switch and lock housing assembly.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the shear bolt into the ignition switch and lock housing assembly.

    Tighten:  Tighten the screw to 1 N.m (9 lb in).

  4. Install the switch mounting plate. Refer to Multifunction Turn Signal Switch Housing Replacement .
  5. Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.