LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> i-280 S, Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Rear >> Installation Procedure

Installation Procedure

    Fig 1: View Of Rear Seat Belt Shoulder Adjuster
    GM1340139Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the 2 bolts securing the rear seat belt shoulder adjuster (1) to the vehicle.

    Tighten:  Tighten the rear seat belt shoulder adjuster bolts to 52.5 N.m (39 lb ft).

  2. Install the body rear corner upper trim panel (2). Refer to Trim Panel Replacement - Body Rear Corner - Upper (Regular Cab, Extended Cab) or Trim Panel Replacement - Body Rear Corner - Upper (Crew Cab) in Interior Trim.
  3. Install the knob on the rear seat belt shoulder adjuster (1).
  4. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.

    Tighten:  Tighten the rear seat belt upper guide bolt to 52.5 N.m (39 lb ft).

  5. Install the rear seat belt upper guide shoulder bolt trim cover.