LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> i-280 S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine Control System & Fuel System - 2.9L - DTC P0013 To DTC P0315) >> DTC P0013 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure the vehicle has the proper oil viscosity.
  2. Observe the engine oil level. The engine oil level should be within the operating range.
  3. Allow the engine to reach operating temperature.
  4. Command each CMP actuator to 20 percent. The CMP actuator angle desired parameter should match the CMP actuator actual parameter.
  5. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.