LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> i-280 S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Lighting Systems) >> Repair Instructions >> Hazard Warning Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 Isuzu i-290, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Hazard Warning Switch
    GM1276394Courtesy of GENERAL MOTORS CORP.
  1. Position the switch (1) to the trim plate.
  2. Ensure the switch key-way is indexed to the trim plate.
  3. Install the switch to the trim plate ensuring the tabs are fully seated.
  4. Fig 2: View Of Hazard Warning Switch Wiring
    GM1276393Courtesy of GENERAL MOTORS CORP.
  5. Connect the hazard switch electrical connector.
  6. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .