LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> i-280 S, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.8L (LK5) - Introduction (2 Of 2) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle, high enough to access the top of the fuel tank through the wheelhouse liner. Refer to Lifting and Jacking the Vehicle in General Information.
  2. If the vehicle is crew cab, lower the fuel tank. Refer to Fuel Tank Replacement .
  3. Remove the left pickup box wheelhouse liner. Refer to Pickup Box Wheelhouse Liner Replacement in Body Rear End.
  4. Fig 1: View Of Fuel Tank Pressure Sensor & Fuel Tank Module
    GM1361711Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector (2) from the fuel tank pressure (FTP) sensor (1).
  6. Fig 2: View Of FTP Sensor
    GM1361717Courtesy of GENERAL MOTORS CORP.
  7. Pull upward in order to remove the FTP sensor from the fuel tank module.