LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> i-280 S, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.8L (LK5) - Introduction (2 Of 2) >> Repair Instructions >> Fuel Injector Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel rail assembly. Refer to Fuel Rail Assembly Replacement .
  2. Fig 1: View Of Fuel Injector
    GM1361731Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the fuel injector harness connector from the fuel injector.
  4. Remove the fuel injector retainer clip.
  5. Pull the fuel injector from the fuel rail.
  6. Fig 2: View Of Fuel Injector, Clip & O-Rings
    GM351185Courtesy of GENERAL MOTORS CORP.
  7. Discard the fuel injector retainer clip (1).
  8. Remove the fuel injector O-ring seals (2, 4) from both ends of the fuel injector (3)

    Discard the O-ring seals (2, 4).