LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> i-280 S, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Positive Cable Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Fig 1: View Of Battery Cables
    GM1313634Courtesy of GENERAL MOTORS CORP.
  3. Open the protective cover (3) to access the battery positive cable terminal.
  4. Loosen the battery positive cable nut (4).
  5. Disconnect the battery positive cable from the battery.
  6. Fig 2: View Of Battery Cable Harness Retainer
    GM1313637Courtesy of GENERAL MOTORS CORP.
  7. Open the battery cables harness retainers (3, 4).
  8. Fig 3: Locating Positive Cable
    GM1313640Courtesy of GENERAL MOTORS CORP.
  9. Press the locking tabs inward in order to remove the underhood fuse block cover from the underhood fuse block.
  10. Remove the nut (3) securing the battery positive cable (4) to the underhood fuse block (1).
  11. Remove the battery positive cable (4) from the upper portion of the battery cables harness conduit (6).
  12. Raise and support the vehicle only high enough to access the remainder of the cable through the wheelhouse. Refer to Lifting and Jacking the Vehicle in General Information.
  13. Remove the left wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front in Body Front End.
  14. Fig 4: Locating Positive Battery Cable
    GM1313639Courtesy of GENERAL MOTORS CORP.
  15. Remove the starter terminal nut (1) and disconnect the battery positive cable (2) from the starter.
  16. Fig 5: Locating Battery Cable Harness Retainer & Conduit
    GM1313638Courtesy of GENERAL MOTORS CORP.
  17. Open the battery cables harness retainer (5) at the engine wiring harness bracket (1).
  18. Remove the battery positive cable (2) from the battery cables harness conduit (6).