LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> i-280 S, Standard >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of BPMV & Mounting Bracket
    GM1384684Courtesy of GENERAL MOTORS CORP.
  1. Install the BPMV to the mounting bracket.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten the mounting nuts.

    Tighten:  Tighten the mounting nuts to 8 N.m (71 lb in).

  4. Install the EBCM assembly. Refer to Electronic Brake Control Module Replacement .
  5. Bleed the system. Refer to Hydraulic Brake System Bleeding (Manual) or Hydraulic Brake System Bleeding (Pressure) in Hydraulic Brakes.