LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> Ascender 4WD L6-4.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Unit Repair >> Assembly >> Heater Inlet Pipe Installation

Heater Inlet Pipe Installation



Heater Inlet Pipe Installation




1. Install the heater inlet pipe.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the heater inlet pipe bolt.

Tighten the heater inlet pipe bolt to 10 N.m (89 lb in).