LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2003 >> Ascender 4WD V8-5.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Heat Shield Replacement

Heat Shield Replacement

Heat Shield Replacement

Removal Procedure
1. Raise the vehicle.





2. Remove the two bolts securing the transmission heat shield to the transmission.
3. Remove the transmission heat shield from the transmission.

Installation Procedure





1. Install the transmission heat shield to the transmission.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the two bolts securing the transmission heat shield to the transmission.
Tighten the bolts to 17 Nm (13 ft. lbs.).
3. Lower the vehicle.