LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2002 >> Rodeo LSE, 3.2 W, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - Self-Diagnostics - 2.2L) >> Self-Diagnostic System >> On-Board Diagnostic II System Check >> Notes

On-Board Diagnostic II System Check: Notes

WARNING: This page is about a different variant/trim than selected.
NOTE: Use of TECH 2 scan tool or equivalent is required to perform On-Board Diagnostic II System Check.
NOTE: To identify component terminals and wire colors referenced in testing, see WIRING DIAGRAMS article. Perform all voltage tests with a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm impedance, unless stated otherwise in test procedure.