LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1999 >> Rodeo S 2WD V6-3.2L >> Repair and Diagnosis >> Starting and Charging >> Battery >> Service and Repair >> Removal and Installation

Removal and Installation




Removal
1. Remove negative cable (1).
2. Remove positive cable (2).
3. Remove retainer screw and rods (3).
4. Remove retainer (4).
5. Remove battery (5).

Installation




1. Install battery (5).
2. Install retainer (4).
3. Instal retainer screw and rods (3).

NOTE: Make sure that the rod is hooked on the body side.

4. Install positive cable (2).
5. Install negative cable (1).